JOYETECH EKEE WITH PROCARE MOTOR KIT

JOYETECH EKEE WITH PROCARE MOTOR KIT

Here is the new Joyetech EKEE with ProCore Motor Kit, comes with the EKEE mod and ProCore Motor tank. Featuring a 1.3 inch OLED color display and an easy-to-go interface, this compact EKEE mod is available in multiple attractive finishes. It can reach 80W max power, and feature 2A quick charge, real time lock, preheat and the new nicotine intake calculation. As for the ProCore Motor features the innovative flip type top-fill system and detachable design. It's simplicity and modesty will satisfy you on daily basis.

Parameters :
Size: 27.0mm (W)*47.5mm (L)*117.5mm (H)
E-liquid capacity: 2ml (can be changed to 4.5ml with the spare glass tube)
Battery capacity: 2000mah
Display: 1.3 inch TFT color screen
Output range: 1-80W
Output modes: Power/Bypass/Temp(Ni,Ti,SS)/TCR(M1,M2,M3)
Resistance range: 0.05-1.5ohm for TEMP/TCR mode
Depth of 510 pins applicable: 4.0-5.5mm
0.1-3.5ohm for Power/ Bypass mode
Temperature Control:100-315°C/200-600°F
Max charging current:2A
Max output current:30A
Max output voltage: 9V

Joyetech EKEE with ProCore Motor Kit comes with :
1pc Joyetech EKEE Mod
1pc ProCore Motor Atomizer
1pc ProC1 (0.4ohm) Head
1pc ProC1-S (0.25ohm) Head
1pc Extended Vent Pipe
1pc Standard Glass Tube (4.5m)
1pc QC USB Cable
1pc Manual
1pc Warranty Card
1pc Warning Card
Spare Parts

Features :

1. Temperature protect for safe charging

2. Unique and modern e-cigarette

3. 1.3 inch large color display

4. 2000mAh built-in battery with 80W max output, which can satisfy you on a daily basis.

5. 2A quick charge System

6. Flip type top-fill design
Simply push and pull the top cap to reveal the filling hole then you're free to fill the e-liquid. Simple and convenient.

7. Balanced flavor and clouds

8. Totally detachable and easy to clean. Applicable with large capacity 4.5ml & 2ml

9.  ProC series heads

10. Applicable for various tanks
The exquisite spring loaded 510 connector of the EKEE is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm. Tanks are also free to go up to 25mm diameter as you prefer.

11. Upgradeable firmware

How To Use

1. Uninstall the atomizer base, the ProC series head is located right on it.

2. Unscrew the atomizer head and replace it with a new one if needed.

3. Drip a few drops of e-liquid into the head and screw it back onto the base.

4. Install the atomizer base.

5. push and pull the top cap to reveal the filling hole.

6. inject the e-liquid into the refilling hole

7. Close the top cap, adjust the airflow inlet and you're ready to go.